Wall Mounted Units

240-876-6203

Print
Each unit may have one or more modifications / variations.
To see them, you must first Log In.
• Units DO NOT have BACK.             • Units MUST be attached to walls.             • All Width measurements indicate inside dimensions.
• Units "L", "W", "Y" and "H" have baskets.
• Drawer Convention: P - Pantry, M - Medium, R - Regular , D - Deep, E - Equipment, F - File, G - General, TDH - Tilt Down Hamper
• For units that side panels are more than 18” deep, the drawer box front to back measurement will remain at 17 3/4” (450mm). Maximum drawer box front to back is 17 3/4” (450mm).
• Wall Mounted Units height dimensions are based on installing them at 84" AFF (After Finished Floor) measured to top of the unit. However, installer may change the height (AFF) as desired.
WARNING: Units with baskets have standard widths. If you change a unit without a basket to a unit with a basket, the unit width will automatically change to the next smaller standard width.
WARNING: Units with drawers have standard widths. If you change to a unit without drawers to a unit with drawers, the unit width will automatically change to the next smaller standard width.
WARNING: All Vertical Panels less than or equal to 13” depth will have 2 lines of holes. Vertical Panels greater than or equal to 14 ¼” depth will have 3 lines of holes.
WARNING: Do not use Wall Mounted Units in Pantries, Library Bookcases, and Garage Shelving due to excessive amount of weight that can be put on the shelves. Also, Wall Mounted Units must not be used on plaster walls or walls with metal studs.
Units with Rods


1 Modifications
Min=10.5,Max=31.5


2 Modifications
Min=10.5,Max=31.5


216 Modifications
Min=10.5,Max=31.5


3 Modifications
Min=10.5,Max=31.5


1 Modifications
Min=10.5,Max=31.5


1 Modifications
Min=10.5,Max=31.5
 
Drawer Units  -  Available outside widths:   18,   21,   24,   27,   30


60 Modifications
( 2D 1R )
( 1D 2R )
( 3R )
( 4R )


30 Modifications
( 1D )
( 1R )


45 Modifications
( 2D )
( 1D 1R )
( 2R )
 
Shelving Unit
 

375 Modifications
Min=10.5,Max=31.5
 
General Unit
 

4 Modifications
Min=10.5,Max=37.5
 
Total Unit Modifications: 738
Get Organized with Do it yourself Closets

All of our material specifications allow for high quality construction resulting in smooth operation and guaranteed longevity. And because we offer so many customizable options, there's a solution for any type of budget. We take pride in DIY closets. Because we get you involved in the process, you too will take more pride in your brand new closet. Say goodbye to clutter, piles of mismatched shoes, shirtsleeves hanging off the hanger, or sweaters haphazardly thrown. With a do it yourself closet, we cannot guarantee you will suddenly become the poster child for organization, but we can tell you an organized closet - that looks good too - is key to making every day a little bit easier.

• Drawer Convention: P - Pantry, M - Medium, R - Regular , D - Deep, E - Equipment, F - File, G - General, TDH - Tilt Down Hamper
Office Base Cabinets